Second Row

INSTALLATION

NOTE: For detailed seat view, Front Seats .

1. Carefully install the cover to the foam, installing any hog rings.
2. If required, feed the seat belt through the seat cover.
3. Position the seat cover and foam to the seat back frame.
4. Install the seat cover clips to the seat back.
5. Install the seat back panel. Seat Back Panel - Installation.
6. For the 60 split seat only, install the seat belt anchor bolt. Tighten to 49 N-m (36 ft. lbs.).
7. Fold the seat back up.
8. Install the headrest guides and headrest.
9. Install the seat belt trim, if required.
10. Install the folding seat handle, mounting fasteners and cover to the seat back.