Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously

Engine Oil Cooler - Removal

REMOVAL

NOTE: The oil cooler can not be cleaned out. In the event that the engine requires rebuilding or replacement, replace the oil cooler.

1. Perform the fuel pressure release procedure Service and Repair.
2. Disconnect and isolate the negative battery cable.
3. Drain the cooling system Cooling System.
4. Remove the air cleaner housing assembly, upper and lower intake manifolds Intake Manifold - Removal
5. Remove four bolts (2) and two screws (1) and (3).
6. Remove the oil cooler (4).

7. Remove and discard the oil cooler seals (1).