Quarter Trim Panel - Installation

INSTALLATION





1. If installing the left side quarter trim panel connect the 12v power supply electrical connector (2) from the socket (1).





2. Install the quarter trim panel (1) to the inside of the vehicle, carefully align and install the bottom of the quarter trim panel slots into the load floor first. Then continue to seat the remaining clips on the panel, working from the bottom up. Use hand pressure to seat the clips (3).
3. Install the cargo tie downs and tighten the screw.
4. Install the rear door scuff plate, Scuff Plate - Installation.
5. Install the C-pillar cover, C-Pillar Trim Panel - Installation.
6. Return the rear seat to the up position.