C2206

C2206-VEHICLE CONFIGURATION MISMATCH

For a complete wiring diagram, refer to the Wiring Information.

NOTE: The Electronic Stability Control (ESC) may also be referred to as Electronic Stability Program (ESP) depending on the vehicle model year and configuration. Certain components may also reference ESP, ESC, or use the traction control symbol.

- When Monitored:
Ignition on.

- Set Condition:
This DTC will set if the vehicle type is not identified or incorrectly identified.





ANTI-LOCK BRAKE SYSTEM (ABS) MODULE

NOTE: Diagnose and repair any Powertrain Control Module VIN or Communication DTCs before continuing with this test.

NOTE: If C2202-Original VIN Mismatch / Missing is set along with this DTC, perform the diagnostic procedure for C2202 before continuing with this test. C2202

1. Ignition on, engine not running.
2. Using the scan tool, erase DTCs.
3. Turn ignition off to the lock position.
4. Ignition on, engine not running.
5. Using the scan tool, select View DTCs.

Is the status Active for this DTC?

Yes

- Check vehicle configuration in TIPM.Testing and Inspection If configuration incorrect, fix and reinitialize ABS module.
- Perform the ABS VERIFICATION TEST. ABS Verification Test

No

- Use the scan tool to read DTCs in all other modules. If any communication DTCs are present, perform the appropriate diagnostic procedure. Perform any Technical Service Bulletins that apply. If no problems are found, test is complete.