Light Duty

FRONT - LIGHT DUTY





1. Bottom pistons in caliper bore with C-clamp. Place an old brake shoe between a C-clamp and caliper piston.
2. Clean caliper mounting adapter.
3. Install new anti-rattle clips (1) to the brake pads (2).





4. Install inboard brake pad (4) in adapter (1).
5. Install outboard brake pad (2) in adapter (1).





6. Install the caliper (1) over rotor, Then push the caliper onto the adapter (2).





7. Install caliper slide pin bolts (4) Disc Brake Caliper - Installation.
8. Install wheel and tire assemblies and lower vehicle [1][2]Specifications.
9. Apply brakes several times to seat caliper pistons and brake shoes and obtain firm pedal.
10. Top off master cylinder fluid level.