Removal

REMOVAL






NOTE: If servicing the heater element (1) is required, the entire air intake heater assembly (2) must be replaced.






1. Disconnect both negative battery cables.
2. Remove the intake manifold (2) Intake Manifold - Removal
3. Remove fuel rail Fuel Rail - Removal





4. Remove heater cable nut (2) and the heater cable from stud.
5. Disconnect fuel injector harness connectors (1) and (6).
6. Disconnect crankcase vent line (3) at top of valve cover.
7. Disconnect crankcase pressure sensor harness connector (5).





8. Remove bolts (4) and the air intake heater assembly (2).
9. Remove and discard gasket (5).