Cylinder Head Assembly: Specifications

CYLINDER HEAD ASSEMBLY






Tighten the cylinder head bolts 1 through 10 34 Nm (25 ft. lbs.).
Tighten the cylinder head bolts 11 through 15 20 Nm (15 ft. lbs.).
Tighten the cylinder head bolts 1 through 10 54 Nm (40 ft. lbs.).
Tighten the cylinder head bolts 11 through 15 20 Nm (15 ft. lbs.).
Rotate the cylinder head bolts 1 through 10 90°.
Tighten the cylinder head bolts 11 through 15 34 Nm (25 ft. lbs.)







SURFACE VARIATION - WARPAGE

If tolerances exceed 0.0508 mm (0.002 in.) replace the cylinder head.

INTAKE MANIFOLD
Intake manifold - bolts Specifications

EXHAUST MANIFOLD
Exhaust manifold - bolts Specifications

CAMSHAFT GEAR/SPROCKET
Camshaft Gear/sprocket Specifications