Console PRNDL Bezel

CONSOLE PRNDL BEZEL

Special Tools:










1. Using trim stick or equivalent, remove the console bezel trim ring (1).





2. Remove the rubber insert (1) from the console bezel.





3. Remove the fasteners (1) at the front of the console bezel.





4. Using trim stick or equivalent, remove the console bezel (1).





5. Remove the rubber liners from the center storage tray and cupholders in the console PRDL bezel, and remove the fasteners (1).





6. Disconnect the power outlet harness connector (1) and the shifter harness connector (2).





7. Twist the lower trim piece (1) on the base of the shifter knob counterclockwise, then push down to disengage the trim piece (1).

8. Remove the shifter knob.




9. Twist the shift position indicator lamp connector (1) 1/4 turn counterclockwise, then disconnect the lamp from the console PRNDL bezel.





10. Release the clips (1) on the console PRNDL bezel, and remove the console PRNDL bezel.