Service Procedure

1. Open the driver's door and locate the Certification label on the driver's door as shown in Figure 1.

2. Clean the existing Certification label with alcohol / glass cleaner or equivalent and a soft cloth to remove any dirt, oil residue or grease.

3. Remove the Certification label from its paper backing and carefully install it over the existing Certification label (Figure 1). Firmly press and smooth the label to the surface of the existing Certification label to ensure good adhesion.

4. Locate the Supplemental Tire Pressure Information label on the driver side lower B-post as shown in Figure 1.

5. Clean the existing Supplemental Tire Pressure Information label with alcohol / glass cleaner or equivalent and a soft cloth to remove any dirt, oil residue or grease.

6. Remove the Supplemental Tire Pressure Information label from its paper backing and carefully install it over the existing label (Figure 1). Firmly press and smooth the label to the surface of the existing Supplemental Tire Pressure Information label to ensure good adhesion.