Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2012 >> Avenger V6-3.6L >> Repair and Diagnosis >> Wiper and Washer Systems >> Wiper Switch >> Service and Repair >> Right Multifunction Switch - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Right Multifunction Switch - Installation






INSTALLATION





1. Position the right multi-function switch (2) close enough to the mounting bracket (3) integral to the right side of the clockspring to reconnect the jumper wire harness connector (1) to the connector receptacle on the inboard side of the switch housing.
2. Align the slide tab on the bottom of the switch housing with the channel integral to the clockspring mounting bracket, then slide the switch into the bracket until it is firmly seated.





3. Install and tighten the screw (2) that secures the mounting tab on the back of the right multi-function switch (1) to the mounting bracket on the clockspring (3).
4. Reinstall the upper and lower shrouds onto the steering column. Steering Column Shroud - Installation and Steering Column Shroud - Installation.
5. Reconnect the battery negative cable.

pro multis · About Operation CHARM