Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2012 >> Caliber L4-2.0L >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Accessories and Optional Equipment >> Alarm Module >> Service and Repair >> Sentry Key Immobilizer Module (SKREEM) - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Sentry Key Immobilizer Module (SKREEM) - Installation






INSTALLATION





When a PCM and the SKREEM/WCM are replaced at the same time, perform the following steps in order Testing and Inspection.

- Program the new PCM.
- Program the new SKREEM/WCM.
- Replace all ignition keys and program them to the new SKREEM/WCM.

1. Position the SKREEM/WCM (3) on the ignition lock housing and install the retaining screw (2).





2. Connect the SKREEM/WCM electrical connector (4).

NOTE: On vehicles equipped with the optional Sentry Key Immobilizer System (SKIS), when the SKREEM is replaced with a new unit, a diagnostic scan tool MUST be used to initialize the new SKREEM and to program at least two Sentry Key transponders before the vehicle can be operated Programming and Relearning.

3. Connect the battery negative cable.

pro multis · About Operation CHARM