Wireless Ignition Node (WIN)

B210A-SYSTEM VOLTAGE LOW

For a complete wiring diagram, refer to the Wiring Information.

- When Monitored:
At all times.

- Set Condition:
This is a CAN message that the battery voltage was below 10.0 volts for over 15 seconds.





CHECK POWERTRAIN CONTROL MODULE DTCs
1. With the scan tool, read Powertrain DTCs.

Are there any Powertrain Charging or Battery DTCs present?

Yes

- Perform the appropriate diagnostic procedure. Testing and Inspection.

No

- This code is for information only. At some time there was a low battery system voltage. Check the battery and charging system.
- Perform the BODY VERIFICATION TEST. Body Verification Test.