B1A0C

B1A0C-RKE FOB 5 PERFORMANCE

For a complete wiring diagram, refer to the Wiring Information.

- When Monitored:
Continuously.

- Set Condition:
Scrambled messages to the Wireless Ignition Node (WIN) from the transmitter.

NOTE: The most probable cause that sets this code is the FOBIK transmitter being pressed over 1024 times when it is out of range of the Wireless Ignition Node and it loses synchronization with the rolling code of the WIN. To correct, insert the FOBIK in the ignition and turn to the on position to synchronize the rolling code.





TEST FOR INTERMITTENT CONDITION
1. Put the FOBIK in the ignition and turn the ignition on.
2. With the scan tool, record and erase the DTCs.
3. Turn the ignition off and remove the FOBIK.
4. Operate the FOBIK in all positions several times.
5. With the scan tool, read the DTCs.

Does the scan tool display this DTC as active?

Yes

- Replace and program the FOBIK transmitter using the scan tool.
- Perform the BODY VERIFICATION TEST. Body Verification Test.

No

- The conditions that caused this code to set are not present at this time. Inform the owner of the most probable cause for this code to set and therefore causes the RKE system to be inoperative.
- Perform the BODY VERIFICATION TEST. Body Verification Test.