Power Steering Pump - Installation

5.7L





1. Position the power steering pump (1) and using the holes in the pulley for access, install 3 pump mounting bolts (5) and tighten to 23 Nm (17 ft. lbs.).
2. Install the pressure line (4) on the pump (1) and tighten the nut to 28 Nm (21 ft. lbs.).
3. Install the supply hose (3) on the pump (1).
4. Install the drive belt,Serpentine Accessory Drive Belt - Installation.
5. Install the air cleaner body.
6. Fill and bleed the system with power steering fluid Service and Repair.