Trailer Tow Wiring - Operation

OPERATION

The trailer tow preparation wiring harness is connected to the body wire harness near the left side of the spare tire, just forward of the rear bumper reinforcement. After installation is complete, a trailer tow right stop/turn relay, a trailer tow left stop/turn relay and a trailer tow park lamps relay are secured to the trailer tow harness on the underside of the rear bumper reinforcement behind the rear fascia. The four-way trailer tow connector is located near the center of the rear fascia.

Refer to the appropriate wiring information. The wiring information includes wiring diagrams, proper wire and connector repair procedures, further details on wire harness routing and retention, as well as pin-out and location views for the various wire harness connectors, splices and grounds. Also refer to the Instruction Sheet packaged with the harness for additional details.