Front Bumper Fascia - Installation

INSTALLATION





1. Install the fascia to the vehicle.
2. Reconnect the ambient temp sensor wire connector, if equipped.
3. Reconnect the fog lamp wire connector and side marker connector from body harness, if equipped.
4. Slide the fascia (2) into the mounting tab (1) under the headlamp.





5. Install the pushpins (1) for the fascia (2) at the lower closeout panel.





6. Insert and snap into place the fascia tabs (2) at the bracket (1).
7. Install the torx(R) screw (3) at the wheel well housing.





8. Install the pop rivets (2) at the wheel well opening.
9. Lower the vehicle.





10. Install the pushpins for the fascia (2) at the radiator support.

11. close the hood and check for proper fit.