Rear Door: Adjustments

ADJUSTMENTS

1. Align door to achieve equal spacing to surrounding body panels.
2. Panels should be flush across all gaps .
3. If door needs to be adjusted Fore/Aft loosen B-pillar to hinge bolts.
4. If door needs to be adjusted In/Out loosen door to hinge nuts.
5. If door alignment can not be achieved, it maybe necessary to enlarge (drill) the hinge flange holes to 12.5 mm (1/2 inch).
6. This may allow extra movement to achieve the proper alignment.
7. Remove door and hinge as necessary.