Armrest - Removal

REMOVAL

NOTE: For detailed seat view, Seat - Description .

1. Position the 40 split seat with back folded flat, to the full forward position.
2. Partially remove the armrest side shield and remove the mounting fastener.
3. With the armrest folded down, remove the two mounting fasteners located on the inside of the armrest bracket.
4. Remove the armrest from the vehicle.

NOTE: Only perform the following steps if the cover or foam replacement is required.

5. Remove the armrest plastic cover, by carefully prying up until the retainers disengage.
6. If equipped, remove the headrest.
7. Remove the headrest sleeves, if equipped.
8. Carefully pull the seat cover off of the armrest and remove the cover.
9. Remove the foam as required.