Rear Door

REAR DOOR





1. Check to be certain that the two plastic nuts (1) are in good condition and properly installed in the rear door.
2. Position the Low Frequency (LF) antenna (2) to the rear door.
3. Install and tighten the two screws (3) that secure the LF antenna to the two plastic nuts in the rear door. Tighten the screws securely.
4. Reconnect the wire harness connector (4) to the connector receptacle for the LF antenna.
5. Reinstall the trim panel onto the inside of the rear door. Rear Door Trim Panel - Installation.
6. Reconnect the battery negative cable.