Rear

REMOVAL

1. Access and remove the rear brake rotor. Brake Rotor - Removal





CAUTION: Prior to removal, clean area around sensor head to help prevent contaminants from entering bearing when sensor head is removed.

2. Remove the screw (3) fastening the speed sensor head (2) to the hub and bearing (1).





3. Remove the wheel speed sensor routing clip (4) from the brake tube routing bracket (1).
4. Remove the wheel speed sensor cable from the routing clips (3) above the trailing arm.





5. Remove the wheel speed sensor head (2) from the hub and bearing (1), then pass it through the brake shield.





6. Remove the screw (1) fastening the wheel speed sensor routing clamp (2) to the rear suspension crossmember (3).




7. Remove the screw (2) securing the wheel speed sensor routing clamp (1) to the trailing link.





8. Disconnect the vehicle wiring harness (3) from the wheel speed sensor connector (2) on the body (1).
9. Disengage the wheel speed sensor connector from the routing clip fastened to the body using a screwdriver. Pull the connector forward off the routing clip. Or, if a NEW routing clip is available, remove the routing clip from the body with the connector attached.
10. Remove the wheel speed sensor from the vehicle.