Beverage Cooler

BEVERAGE COOLER

NOTE: LHD model shown in illustrations. RHD model similar.

OUTLET






NOTE: If the beverage cooler cold air supply hose falls back into the instrument panel during outlet installation, the beverage cooler bin may need to be removed from the instrument panel and the hose rerouted through the opening in the bin Instrument Panel Lower Bin - Removal .

1. Position the beverage cooler outlet (1) to the beverage cooler bin (3) and connect the cold air supply hose (2) to the outlet.





2. Feed the cold air supply hose through the opening in the side of the beverage cooler bin (1) and align and install the beverage cooler outlet (2) onto the bin. Make sure the three retaining tabs on the outlet are fully engaged to the bin.

COLD AIR SUPPLY HOSE






NOTE: Illustration shown with instrument panel removed for clarity.

1. Working through the beverage cooler bin opening in the instrument panel, feed the cold air supply hose (1) into the instrument panel. Note the routing of the hose and the instrument panel wiring.
2. Reach up underneath the instrument panel and connect the cold air supply hose to the passenger side of the air distribution housing (3).
3. Working through the beverage cooler bin opening in the instrument panel, engage the cold air supply hose to the bracket (4) located on the air inlet housing (2).
4. Position the beverage cooler bin to the instrument panel and route the cold air supply hose through the beverage cooler outlet opening.
5. Install the beverage cooler bin Instrument Panel Lower Bin - Installation.
6. Install the beverage cooler outlet (refer to OUTLET - INSTALLATION).
7. Install the instrument panel center bezel Instrument Panel Center Bezel - Installation.
8. Install the outer passenger side instrument panel air outlet Air Outlet - Installation.
9. Install the glove box bin Instrument Panel Glove Box - Installation.
10. If equipped, install the silencer trim panel underneath the passenger side of the instrument panel \Lower Silencer Panel - Installation.
11. Reconnect the negative battery cable.