Headlamp Washer Nozzle - Removal

HEADLAMP

CAUTION: Take proper precautions to ensure there is no cosmetic damage done to the paint finish of the headlamp washer nozzle bezel or the front fascia during the following procedure.





1. Raise and support the vehicle.
2. Remove the push pin retainers that secure the lower front edge of the front wheel house splash shield. Splash Shield - Removal.
3. Reach up behind the front fascia to access and securely clamp the headlamp washer supply hose to prevent the contents of the washer reservoir from draining during the following procedure.
4. From behind the front fascia, depress the two integral latches (1) of the washer nozzle bezel and push the nozzle out through the face of the fascia.





5. From the face of the front fascia, pull the nozzle out from the mounting hole far enough to access the headlamp washer nozzle supply hose (1) quick connect fitting (4).
6. Pull the molded plastic lock (2) away from the quick connect fitting far enough to disengage the hose from the washer nozzle nipple (3).
7. Remove the nozzle from the front fascia.