Wiper Arm Linkage - Removal

REMOVAL






NOTE: The front wiper linkage module includes the wiper motor. The wiper motor is also available for separate service replacement and can be removed from the wiper linkage module without removing the module from the vehicle. . Service and Repair

1. Remove both front wiper arms from the wiper pivots. . Service and Repair
2. Disconnect and isolate the battery negative cable.
3. Remove the outer and inner cowl plenum cover/grille panels from the vehicle. Cowl Panel Outer Cover - Removal and . Cowl Panel Inner Cover - Removal
4. Disconnect the headlamp and dash wire harness connector (2) from the wiper motor pigtail wire connector.
5. Remove the three screws (1) that secure the front wiper linkage module (4) to the driver side strut tower bracket (3) and the two cowl brackets (5).
6. Remove the front wiper linkage module from the vehicle as a unit.