Liftgate - Removal

REMOVAL

Special Tools:






WARNING: Do not disconnect the support rod cylinders with the liftgate closed. The support rod pistons are operated by high pressure gas. This pressure could cause damage and/or personal injury if they are removed while the pistons are compressed.





1. Open and support the liftgate.
2. Using a trim stick or equivalent, remove the upper rear headliner trim.
3. Remove the support cylinders from the liftgate. Gas Prop - Removal.
4. Disconnect the wire harnesses and the washer hose.
5. Using a grease pencil or equivalent, mark the hinge location.
6. Remove the liftgate to body fasteners (1) and remove liftgate from vehicle.