Water Pump - Installation

\




2.4L ENGINE










1. Position water pump assembly (1) and gasket onto cylinder block.
2. Position water inlet tube (4) and gasket onto water pump (1).
3. Install mounting bolts (2). Tighten bolts to 25.5 Nm (225 in. lbs.).
4. Install drive belt splash shield.
5. Lower vehicle.
6. Install accessory drive belt Serpentine Accessory Drive Belt - Installation.
7. Evacuate air and refill cooling system.Coolant Air Evacuation
8. Check cooling system for leaks.Component Tests and General Diagnostics