Instrument Panel Demister Duct - Installation

INSTALLATION

NOTE: The demister ducts are serviced with the instrument panel ducts as an assembly.

NOTE: LHD model shown in illustrations. RHD model similar.





1. Position the passenger side instrument panel and demister duct assembly (1) to the instrument panel support (5) and connect the instrument panel and demister duct assembly to the center duct (2) and to the defroster duct (3). Make sure the ducts are fully engaged.
2. Install the two push-pin retainers (4) that secure the passenger side instrument panel and demister duct assembly to the instrument panel support.





3. Position the driver side instrument panel and demister duct assembly (2) to the instrument panel support (6) and connect the instrument panel and demister duct assembly to the center duct (3) and to the defroster duct (4). Make sure the ducts are fully engaged.
4. Install the three push-pin retainers (1 and 5) that secure the driver side instrument panel and demister duct assembly to the instrument panel support.
5. Install the instrument panel cover.
6. Reconnect the negative battery cable.