Fuel Rail - Installation

2.4L





1. Apply a light coating of clean engine oil to the O-ring on the nozzle end of each injector.
2. Install injector into cup of fuel rail.





3. Install retaining clip and check to ensure injector is properly captured in the fuel rail assembly.





4. Insert fuel injector nozzles into openings in intake manifold. Seat the injectors in place.





5. Install the 2 bolts to the fuel rail. Tighten fuel rail bolts to 27 Nm (20 ft. lbs.).





6. Install wiring harness clips to the fuel rail mounting studs.





7. Connect and lock the electrical connectors to the fuel injectors.





8. Connect the fuel line to the fuel rail Service and Repair.
9. Connect negative battery cable, tighten nut to 5 Nm (45 in. lbs.).
10. Use the scan tool ASD Fuel System Test to pressurize the fuel system. Check for leaks.
11. Install engine cover.