Electric Radiator Fan - Installation

INSTALLATION





1. If removed, install the electric cooling fan resistor. Tighten the mounting screw securely.
2. If removed, install the lower fan shroud (1) to the upper fan shroud (2).
3. Position the viscous fan (if equipped), radiator fan shroud (1, 2) and electric cooling fan (3) into the vehicle as an assembly.
4. Install the electric cooling fan (3) by engaging the electric cooling fan's (3) upper and lower retaining clips to the radiator.
5. Install the fan shroud (1, 2) by engaging the fan shroud's (1, 2) lower retaining clips to the radiator/electric cooling fan (3).

NOTE: Make sure all retaining clips lock into place.

6. Install the fan shroud (1, 2) mounting bolts (4). Tighten to 10 Nm (89 in. lbs.).
7. Connect the electric cooling fan (3) electrical connector.





8. If equipped, install the viscous fan assembly. Viscous Radiator Fan Clutch - Installation
9. Position the upper radiator seal.
10. Install the upper radiator seal plastic rivets (2).
11. Install the upper radiator push pins (1).
12. Connect the negative battery cable.