Air Inlet Housing

AIR INLET HOUSING






NOTE: If the foam seal on the air inlet housing is deformed or damaged, it must be replaced.

1. Position the air inlet housing (1) onto the top of the HVAC housing (2).
2. Engage the two retaining tabs (3) that secure the front of the air inlet housing to the HVAC housing.





3. Engage the two retaining tabs (4) that secure the rear of the air inlet housing (3) to the HVAC housing (5).
4. Connect the HVAC wire harness (1) to the recirculation door actuator (2).
5. Install the HVAC housing assembly HVAC Housing - Installation.