Instrument Panel Bezel - Installation

INSTALLATION





1. Position the lower driver side instrument panel bezel onto the lower retaining hoods located on the instrument panel.
2. If equipped, connect the wire harness connector (3) to the adjustable pedal switch (2).
3. Tilt the top of the lower driver side instrument panel bezel upward and fully engage the bezel retaining clips to the instrument panel.
4. Install the two screws (1) that secure the lower driver side instrument panel bezel to the instrument panel. Tighten the screws to 2 Nm (17 in. lbs.).
5. Install the left side cowl trim panel Cowl Trim Panel - Installation.
6. Install the left instrument panel side cover.
7. Reconnect the negative battery cable.