BW 44-44 Transfer Case - Fluid Drain And Refill

FLUID DRAIN AND REFILL





The fill (2) and drain (1) plugs are both in the rear case.

1. Raise vehicle.
2. Position drain pan under transfer case.
3. Remove drain and fill plugs and drain lubricant completely.
4. Install drain plug (1). Tighten plug to 19 - 30 Nm (15 - 22 ft. lbs.).
5. Remove drain pan.
6. Fill transfer case to bottom edge of fill plug opening with the correct fluid for the application. .
7. Install and tighten fill plug (2) to 19 - 30 Nm (15 - 22 ft. lbs.).
8. Wipe any excess fluid that may have spilled onto the exhaust.
9. Lower vehicle.