Splash Shield - Installation

INSTALLATION





1. Position the shield (1) inside the wheelhouse opening and tuck the outboard edge of the shield behind the flange on the fender outer panel.
2. Align and secure the outboard edge of the splash shield to the outer fender. Drive the screws (2) through the fender flange and into the shield.
3. Install the screw (3) and install the screw (4).





4. Install the push pin (2) and seat fully.
5. Install the push pin (4) and seat fully.
6. Install the push pin (3) and seat fully.
7. Secure the ABS harness push pin to the inner shield and seat fully.