Cylinder Head Assembly
CYLINDER HEAD
Tighten the cylinder head bolts 1 through 10 34 Nm (25 ft. lbs.).
Tighten the cylinder head bolts 11 through 15 20 Nm (15 ft. lbs.).
Tighten the cylinder head bolts 1 through 10 54 Nm (40 ft. lbs.).
Tighten the cylinder head bolts 11 through 15 20 Nm (15 ft. lbs.).
Rotate the cylinder head bolts 1 through 10 90°.
Tighten the cylinder head bolts 11 through 15 34 Nm (25 ft. lbs.).
SURFACE VARIATION -- WARPAGE
If tolerances exceed 0.0508 mm (0.002 in.) replace the cylinder head.
INTAKE MANIFOLD
Intake Manifold Specifications
EXHAUST MANIFOLD
Exhaust Manifold Specifications
CAMSHAFT GEAR/SPROCKET
Camshaft Gear/Sprocket Specifications