Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2012 >> RAM 2500 Truck 4WD V8-5.7L >> Repair and Diagnosis >> Transmission and Drivetrain >> Transfer Case >> Service and Repair >> Removal and Replacement >> BW 44-47 Transfer Case - Installation

BW 44-47 Transfer Case - Installation






INSTALLATION





1. Mount transfer case on a transmission jack.
2. Secure transfer case to jack with chains.
3. Position transfer case under vehicle.
4. Align transfer case and transmission shafts and install transfer case onto the transmission.
5. Install and tighten transfer case attaching nuts to 41 Nm (30 ft. lbs.) torque.
6. Remove transmission jack and support stand.
7. Connect the vent hose.
8. Connect the shift position sensor connector.
9. Connect the shift linkage.
10. Align and connect the propeller shafts.Drive Shaft - Installation.Drive Shaft - Installation.
11. Fill transfer case with correct fluid. BW 44-47 Transfer Case - Fluid Drain And Refill
12. Install skid plate, if equipped.
13. Lower vehicle and verify transfer case shift operation.

pro multis · About Operation CHARM