Remote Start Antenna - Removal

REMOVAL





The Remote Start Antenna Module Assembly consists of an electrical connection to the WIN (1), a length of coax cable (2), two mounting clips (3) and (4), and a control module/antenna (5).





The control module (1) is located behind the instrument panel cluster. The module electrical connector plugs into the WIN at the right side of the steering column.

1. Disconnect and isolate negative battery cable.
2. Remove steering column trim panel (knee blocker).
3. Remove steering column shrouds.
4. Remove IP cluster bezel.
5. Remove IP cluster and its three connectors.





6. Remove two module mounting screws (2) from module (1).





7. Using a pair of long needle hose pliers, disengage coax cable retainer clip (2) from IP.





8. Disconnect coax cable electrical connector (1) at WIN (2).
9. Remove remote module assembly.