Lower

INSTALLATION

Standard Cab





1. Position the lower trim (1) back into place and line up the retaining clips.
2. Seat the upper clips fully.
3. Seat the lower clips fully
4. Clip the forward foot into the sheet metal.
5. Install the lower seat belt anchor and tighten to 40 Nm (30 ft. lbs.).
6. If equipped, install the rear storage bin. Storage Bin - Installation

Quad Cab





1. Position the trim (1) back and seat the clips fully.
2. Install the rear door scuff plate. Scuff Plate - Installation
3. Install the front door cowl trim panel. Cowl Trim Panel - Installation