Removal

REMOVAL

1. Raise and support the vehicle.
2. Remove the wheel and tire assembly.




3. Remove the hub extension (1) mounting nuts and remove the extension from the rotor if equipped (Figure 1).





4. Remove the brake caliper, Disc Brake Caliper - Removal.
5. Remove the cotter pin (2) and the hub nut (1) from the axle shaft (Figure 2).

6. Remove the caliper adapter. Disc Brake Caliper Adapter - Removal.
7. Remove the disc brake rotor. Brake Rotor - Removal.
8. Disconnect the wheel speed sensor wire.
9. Remove the hub/bearing 4 mounting bolts and remove the hub/bearing.