Winch Motor - Installation

INSTALLATION





1. With the winch assembly (1) standing on the clutch side verify that the motor coupler (2) is centered in the drive shaft opening (3).





2. Position the motor drive shaft into the motor coupler splines and install the motor (2).
3. Install the bolts (1) and tighten to 9 Nm (82 in. lbs.).





4. Install the relay pack (1). Winch Relay Pack - Installation





5. Install the support bracket (1) and install the bolts (3).
6. Tighten the bolts to 108 Nm (80 ft. lbs.).





7. Position the wire rope through the roller opening and install the roller (4), shaft (3) and clip (1).





8. Install the winch assembly (2). Winch - Installation