Body Isolator - Installation

INSTALLATION






CAUTION: Whenever a body isolator bolt requires servicing or tightening, it is necessary to remove the bolt and install new thread locker compound to the threads.

NOTE: Quad cab model shown in the illustration. Body isolators for regular and club cab models are similar.

1. Position the isolators (1) under the cab as necessary.
2. Install the nuts (2).
3. Lower the cab onto the isolators (1) and install the mounting nuts (2).
4. Tighten the nuts to 68 Nm (50 ft. lbs.).





5. Lower the cab onto the isolators and install the mounting bolts (2) and mass damper (1) as necessary (six Regular cab, eight Quad Cab).
6. Tighten the mounting bolts to 108 Nm (80 ft. lbs.).