Lower

INSTALLATION

Crew Cab





1. Position the lower trim (2) into place and line up the clips to the pillar and rear door scuff plate.
2. Seat the retaining clips fully.
3. Install the lower seat belt anchor and tighten to 40 Nm (30 ft. lbs.).

Quad Cab





1. Position the seat belt (2) through the hold in the trim (3).
2. Position the lower trim (2) into place and line up the clips to the pillar and rear door scuff plate.
3. Seat the retaining clips fully.
4. Install the lower seat belt anchor and tighten to 40 Nm (30 ft. lbs.).

Mega Cab





1. Position the lower trim (2) into place and line up the clips to the pillar and rear door scuff plate.
2. Install the lower seat belt anchor and tighten to 40 Nm (30 ft. lbs.).
3. Install the rear seat assembly. Rear Seat - Installation