Upper

INSTALLATION

Crew Cab





1. Position the seat belt (3) through the hold in the trim (1).
2. Position the upper trim (1) back in place and seat the clips fully.
3. Install the lower C-pillar trim (2). C-Pillar Trim Panel - Installation

Quad Cab





1. Position the upper trim (1) back in place and seat the clips fully.
2. Install the turning loop bolt (2) and tighten to 40 Nm (30 ft. lbs.).
3. Install the turning loop cover.
4. Install the lower C-pillar trim (2). C-Pillar Trim Panel - Installation

Mega Cab





1. Position the upper trim back in place and seat the clips fully.





2. Install the turning loop bolt (2) and tighten to 40 Nm (30 ft. lbs.).
3. Install the lower C-pillar trim. C-Pillar Trim Panel - Installation