Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2012 >> RAM 3500 Truck 2WD L6-6.7L DSL Turbo High Output >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Cylinder Head Assembly >> Valve Cover >> Service and Repair >> Removal and Replacement >> Cylinder Head Cover(s) - Installation >> Cylinder Head Cover Gasket

Cylinder Head Cover Gasket






CYLINDER HEAD COVER GASKET










1. Clean off any oil from cylinder head cover gasket
2. Inspect cylinder head cover gasket for cuts or damage. Replace if damaged.
3. Install cylinder head cover gasket (2).
4. Install injector solenoid nuts (1) at injectors. Tighten to 1.25 Nm (11 in. lbs. ).
5. Connect injector harness connectors (3) at cylinder head cover gasket.

pro multis · About Operation CHARM