Left Blind Spot Sensor (LBSS)

U0184-00-LOST COMMUNICATION WITH RADIO

For a complete wiring diagram, refer to the Wiring Information.

- When Monitored:
Continuously when the ignition is on.

Battery voltage between 10 and 16 volts.

Ignition Off Draw (IOD) fuse installed.

Totally Integrated Power Module (TIPM) is configured correctly.

- Set Condition:
Bus messages not received from the Radio for approximately two to five seconds.





Diagnostic Test
VERIFY DIAGNOSTIC TROUBLE CODE (DTC) IS ACTIVE

NOTE: Make sure the IOD fuse is installed and battery voltage is between 10 and 16 volts before proceeding.

1. With the scan tool, read DTCs.

Is this DTC active?

Yes

- Totally Integrated Power Module (TIPM) and perform the U0184-Lost Communication with Radio diagnostic procedure.

No

- Manufacturer Code Charts and perform the Stored Lost Communication DTCs diagnostic procedure.