Instrument Panel Glove Box - Removal - RHD

REMOVAL

UPPER GLOVE BOX

1. Remove the instrument panel center bezel. Instrument Panel Center Bezel - Removal.

2. Remove the instrument panel end cap.

3. Remove fasteners from the upper glove box.

4. Carefully pry out the upper glove box disengaging the spring clips.

LOWER GLOVE BOX

1. Open lower glove box door.

2. While pressing on both sides of the door pull the door down until stops are disengaged from the lower IP panel.

3. Carefully disengage the bottom hinges and remove the door.