Third Row Power Folding Seat Actuator - Installation

INSTALLATION






1. Position the seat leg latch release actuator and cable assembly (2) onto the seat pan (6).

2. Connect the seat leg latch release actuator and cable assembly electrical connector (3).

3. Install the pushpin retainers (1) securing the seat leg latch release actuator and cable assembly (2) to the seat pan (6).





4. Install the cable assembly onto the seat leg.

a. Route the cable assembly through the seat pan and down the seat leg (3).

b. Install the cable sleeve onto the seat leg cable retaining bracket (5).

c. Push the cable connector (4) up to secure it onto the latch stud.

d. Install the tie strap holding the switch wire harness and leg latch release cable to the seat leg assembly (3).

e. Repeat this procedure for the other seat leg.

5. Install the seat cushion and cover assembly, Seat Cushion Cover - Installation.

6. Install the third row power folding seat, Seat - Installation.

7. Perform the third row power folding seat recliner calibration, Programming and Relearning. Verify proper seat operation.