Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (I know, we said we wouldn't ask any more...but it's important!)

Second Row

REMOVAL

Special Tools:

1. Disconnect and isolate the negative battery cable.

2. Using Trim Stick (C-4755) or equivalent, gently pry the upper edge of the 2nd row heated seat switch bezel (4) away from the sliding door trim panel (6).

3. Once the upper edge is free from the trim panel, rock the switch and bezel out of the sliding door trim panel opening.

4. Disconnect the heated seat switch wire harness connector (5).

5. From the back side of the switch bezel (4), gently pry the switch (3) free from the bezel.