Front

REMOVAL

WARNING:
Refer to the applicable warnings and cautions for this system before performing the following operation and. Failure to follow the warnings and cautions may result in serious or fatal injury.

NOTE:
LHD model shown in illustrations. RHD model similar.





1. Recover the refrigerant from the refrigerant system Refrigerant System Recovery.

2. Remove the nut (3) that secures the A/C suction line (1) and the A/C liquid line (4) to the A/C expansion valve (2).

3. Disconnect the A/C suction and liquid lines from the A/C expansion valve and remove and discard the washer seals.





4. Remove the two bolts (1) that secure the A/C expansion valve (2) to the A/C evaporator.

5. Remove the A/C expansion valve from the A/C evaporator and remove and discard the O-ring seals.

6. Install plugs in, or tape over the opened refrigerant line fittings and the evaporator and expansion valve ports.