Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2013 >> Grand Caravan V6-3.6L >> Repair and Diagnosis >> Instrument Panel, Gauges and Warning Indicators >> Audible Warning Device >> Description and Operation >> Chime/Buzzer - Operation >> Chime Warning System

Chime Warning System






CHIME WARNING SYSTEM

The chime warning system operates on battery voltage received through a fuse in the Totally Integrated Power Module (TIPM) on a non-switched fused B(+) circuit so that the system may operate regardless of the ignition switch position. The chime warning system also monitors the ignition switch position so that some chime features are functional only with the ignition switch in the ON position, while others are functional regardless of the ignition switch position.

The chime warning system provides an audible indication to the vehicle operator or occupants under the following conditions:

- Door Ajar Warning - The Instrument Cluster also known as the Cab Compartment Node (CCN) will generate one short chime when the ignition switch is in the ON position and a door textual message is displayed in the odometer Vacuum Fluorescent Display (VFD) unit, or when a DOOR AJAR textual message and icon is displayed in the optional Electronic Vehicle Information Center (EVIC) reconfigurable display of the instrument cluster. This warning indicates that a door is, or multiple doors are not closed or completely latched. When the vehicle is moving, and a door is left ajar, the door ajar lamp will illuminate, and an audible chime will be heard.

- Fasten Seat Belt Indicator Warning - The CCN transducer will generate repetitive chimes at a slow rate to announce that the seat belt switches and the ignition switch indicate that the driver side front seat belt is not fastened with the ignition switch in the ON position. The chime warning system also supports the enhanced seat belt reminder (beltminder) when this feature is enabled. Instrument Cluster - Operation for more information.

- Head/Park Lamps-On Warning - The CCN transducer will generate continuous repetitive chimes to indicate that inputs from the headlamp switch, the ignition switch and the driver side front door ajar switch indicate that the exterior lighting is turned ON with the ignition switch in the OFF position and the driver side front door is open. The chimes will continue to sound until the exterior lamps are turned OFF, the driver side front door is closed, or the ignition switch is turned to the ON position, whichever occurs first.

- Key-In-Ignition Warning - The CCN transducer will generate continuous repetitive chimes to indicate that inputs from the ignition switch and the driver side front door ajar switch indicate that the key is in the ignition lock cylinder with the ignition switch in the OFF position with the driver side front door open. The chimes will continue to sound until the key is removed from the ignition lock cylinder, the driver side front door is closed, or the ignition switch is turned to the ON position, whichever occurs first.

- Liftgate Ajar Warning - The CCN transducer will generate one short chime when the ignition switch is in the ON position and a GATE textual message is displayed in the odometer Vacuum Fluorescent Display (VFD) unit, or when a liftgate textual message and icon is displayed in the optional Electronic Vehicle Information Center (EVIC) reconfigurable display of the instrument cluster. This warning indicates that the liftgate is not closed or completely latched. When the vehicle is moving, and a door is left ajar, the liftgate ajar lamp will illuminate, and an audible chime will be heard.

- Over speed Warning - The CCN transducer will generate one short chime when the vehicle speed is over a pre-programmed speed value. This feature is only enabled on vehicles that have been configured for sale in a Middle East Gulf Coast Country (GCC).

- Park Brake Reminder - The Park Brake Reminder lamp will illuminate when the brake is on. As the vehicle starts moving and gains a speed , the CCN transducer will generate one short chime when the brake/park brake indicator is illuminated to announce that the park brake is applied or not fully released. This chime will repeat each time the input conditions are met.

- Sentry Key Customer Learn Mode Announcement - The CCN transducer will generate one short chime to confirm that the Sentry Key electronic Customer Learn mode is active, which indicates that the Wireless Ignition Node (WIN) is prepared for programming additional Sentry Key transponders. This chime feature is only active on vehicles sold in a market where Customer Learn programming is an allowed feature.

- Turn Signal/Hazard Warning Flasher Emulation - The CCN relay will generate repetitive clicks at a slow rate to emulate an electromechanical flasher when the turn signal or hazard warning system are operating. The CCN relay will generate repetitive clicks at a fast rate to indicate that the right or left turn signals are operating with one or more bulbs ineffective. In either case, the clicks will continue until the turn signal or hazard warning system is turned OFF.

- Turn Signal On Warning - The CCN transducer will generate one short chime to indicate that a turn signal has been active continuously for 1.6 kilometers (1 mile) with the vehicle speed greater than 22 kilometers-per-hour (15 miles-per hour). Vehicles built for markets other than the United States and Canada have a revised distance threshold of 4 kilometers (2.49 miles) for this feature. This chime will repeat each time the input conditions are met. The hazard warning flashers will not activate this chime feature.

- Warning Indicator Announcement - The CCN transducer will generate one short chime each time the Malfunction Indicator Lamp (MIL), low washer fluid indicator, oil change required indicator, Tire Pressure Monitor (TPM) indicator, Electronic Stability Program (ESP) OFF indicator, gas cap indicator, Ignition-OFF Draw (IOD) fuse, low coolant indicator or certain other indicators are illuminated by the instrument cluster circuitry. The MIL and certain other indicators may be illuminated when any critical vehicle systems are operating outside of their normal or default parameters. The instrument cluster monitors electronic messages received over the CAN data bus to determine when to illuminate these indicators.

The CCN provides chime service for all available features in the chime warning system, except for the audible warning function provided by the optional park assist system display module. The CCN relies upon its internal programming, numerous hard wired inputs, and electronic message inputs received from other modules over the Controller Area Network (CAN) and the Local Interface Network (LIN) data buses to provide the chime warning system features. The internal programming of the CCN determines the priority of each chime request input that is received, as well as the rate and duration of each chime that is to be generated.

The hard wired circuits between components related to the chime warning system may be diagnosed using conventional diagnostic tools and procedures. Refer to the appropriate wiring information. The wiring information includes wiring diagrams, proper wire and connector repair procedures, details of wire harness routing and retention, connector pin out information and location views for the various wire harness connectors, splices and grounds.

However, conventional diagnostic methods will not prove conclusive in the diagnosis of the chime warning system or the electronic controls or communication between modules and other devices that provide some features of the chime warning system. The most reliable, efficient, and accurate means to diagnose the chime warning system or the electronic controls and communication related to chime warning system operation requires the use of a diagnostic scan tool. Refer to the appropriate diagnostic information.

pro multis · About Operation CHARM