Supply Hose

INSTALLATION






1. Slide supply hose (3) onto reservoir (1). Do not install clamp at this time.





2. Raise and support vehicle Service and Repair.

3. Slide supply hose (2) onto power steering pump (4). Position clamp over supply hose on pump fitting and attach it. Be sure hose clamp is installed past bead on pump fitting.

4. Lower vehicle.

5. Position clamp over supply hose on reservoir fitting and attach it. Be sure hose clamp is installed past bead on fluid reservoir fitting.

6. Install negative (-) battery cable on negative battery post.

7. Fill and bleed power steering system. Service and Repair

8. Inspect for leaks.