Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (I know, we said we wouldn't ask any more...but it's important!)
Programming and Relearning
UPDATE PRESSURE THRESHOLDS
NOTE:
The wiTECH software level must be at the latest release to perform this procedure.
NOTE:
The vehicle must be driven before the TPMS light will turn off.
CAUTION:
Read all notes and cautions for programming procedures.
NOTE:
Have the vehicle PIN readily available before running the routine
1. Connect a battery charger to the vehicle.
2. With the wiTECH diagnostic application, perform the following steps:
- Select "WIRELESS CONTROL MODULE (WCM)"
- Select the "MISCELLANEOUS FUNCTIONS" tab
- Highlight and select "UPDATE PRESSURE THRESHOLDS"
- Note On-Screen instructions and select the "NEXT" button
- Verify current settings, select the "NEXT" button to change settings
- Select "NEXT"
- Enter the PIN when prompted.
- Select "NEXT"
- Verify that the PIN number is correct
- Once verified, select "NEXT"
- Select "NEXT"
- Wait for the WCM to update it's configuration
- Once the WCM configuration is complete, select "NEXT"
- Note On-Screen instructions and select the "FINISH" button